To Care for a Blue Fir Christmas tree, you have to ask the tree vendor to cut a 1/2 inch disk from the end of the tree trunk. After that, you need to Place the tree in water as soon as you get home. Then, you should Place it in a bucket of water with the tree propped against the wall or lay the tree on the floor and wrap a water-soaked towel around the base. Next, you must Use a reservoir stand with a basin you can fill with water. Forth, you can pour water into the basin until the water comes a few inches from the top of the stand to allow for the water to rise once the tree is inserted.
After that, Place the tree trunk into the stand. Then, Hold the tree upright as you tighten the rods until the rods are so tight that the tree can stand without you holding it. Next, check the water level in the stand daily. Forth, never let the water goes below the base of the tree trunk. After that, Use a cup of water to fill the basin of the stand every few days so that there is always enough fresh water.
No related posts.